Pipelayer · 40.8 t
Caterpillar PL72
Lökbatan yard · ×2
- with operator
- ₼1,050 / day
- without operator
- ₼820 / day
Pipelines
We lay, replace and repair pipelines: one contractor from trench to hydrotest, with our own equipment and certified welders.
- A day of the crew, 15 people
- ₼2,600
- Where
- Onshore, nearshore
- Minimum
- 5 days
What we do
New lines
4 to 28-inch flowlines from wells to gathering stations, water and gas lines: trenching, stringing, welding, coating, lowering-in and backfill.
Replacement
Old lines replaced section by section without long shut-ins: the new section is built alongside, then tied in.
Emergency repair
A crew and equipment at the leak within 24 hours: clamps, cut-outs, inspection and testing.
Nearshore
Lines in up to 4 to 5 m of water: pipe welded into strings on the shore, boat support, weather windows in the schedule.
How a job goes
- We survey the route and existing services and get the excavation permits.
- Welding procedures and welder tests are witnessed by the client’s inspector.
- Every weld is tested by ultrasound or radiography and reported the same day.
- The line is hydrotested, cathodic protection is surveyed and the as-built file is handed over.
Price
5 days with the usual crew and equipment, within Baku, VAT included. Change the crew, equipment and site for your job in the quote.
| Crew: supervisor ×1, engineer ×1, welder ×4, fitter ×2, rigger ×2, helper ×4, HSE adviser ×1 | ₼13,000 |
|---|---|
| Caterpillar PL72 · 5 days | ₼5,250 |
| Komatsu PC210LC-11 · 5 days | ₼2,800 |
| Lincoln Electric Pipeliner 200D · 5 days | ₼1,425 |
| Mobilisation and demobilisation | ₼2,080 |
| Excl. VAT | ₼24,555 |
| Total incl. VAT | ₼28,975 |
Included
- Supervisor, engineer, 4 welders, 2 fitters, 2 riggers, 4 helpers and an HSE adviser
- Pipelayer, excavator and welding sets with operators
- Welding consumables and visual weld inspection
Not included
- Pipe and fittings (from the client or quoted separately)
- Fuel
- Agreements with landowners
Equipment we use on this work
All equipment
Excavator · 23.2 t
Komatsu PC210LC-11
Lökbatan yard · ×2
- with operator
- ₼560 / day
- without operator
- ₼420 / day
Welding set · 200 A
Lincoln Electric Pipeliner 200D
Lökbatan yard · ×4
- with operator
- ₼285 / day
- without operator
- ₼80 / day
Projects
All projectsSiyazan district · 2026 · Onshore
Flowline replacement in Siyazan
Pipelines, inspection and NDT, corrosion protection
18.4 km of 6 to 10-inch flowline replaced
Off Pirallahi island · 2025 · Nearshore
Nearshore pipeline repair at Pirallahi
Pipelines, inspection and NDT
2.6 km of 12-inch pipe replaced
Questions
How many welds a day?
A four-welder crew averages 18 to 20 welds a day on 6 to 10-inch pipe; in Siyazan the average was 19.
What certificates do your welders hold?
All are qualified in the 6G position; on every project they test again to the client’s procedure.
Do you buy the pipe?
Usually the client supplies it. If you prefer, we tender for it and add it to our offer.
Describe the job, see the price at once
Pick the service, the site and the days: the price is worked out with crew, equipment, mobilisation and VAT. We answer within one working day.